Porta Brace CLK-URSABC

camRade wetSuit Blackmagic URSA Broadcast SKU: CAM-WS-BMURSA-BROADCAST The camRade wetSuit Blackmagic URSA Broadcast is a soft and flexible rain cover that protects your camera against the elements. This cover is tailor-made for the URSA Broadcast camera from Blackmagic Design. This wetSuit Blackmagic URSA Broadcast exists of one piece covering the viewfinder, microphone and other accessories. The special near silent fabric reduces unwanted sound effects that might be caused by wind and rain. Whether you use the camera as a handheld or on a tripod, the cover can be closed off neatly with the multiple zipper system on the bottom. The WS Blackmagic URSA Broadcast has a clear vinyl window on the side which can be opened and closed with hook and loop fasteners. This allows good visibility when you need to adjust the menu, audio input select levels, etc. This Blackmagic URSA Broadcast rain cover will be delivered to you in a waterproof pouch with zipper, which you can use for storage and transportation of the cover when not in active use. Key features Form-fitted for the Blackmagic URSA Broadcast cameraTailor-made of waterproof near silent fabricProtection against bad weather conditionsFull access to the controls, ports, memory cards, display, zoom, battery compartment and handgripStrong Easy-on-Easy-off construction with hook and loop fasteners and YKK® zippersHandmade in France, Europe5 Year warranty

Porta Brace RS-HCXFB80ENG The RS-HCXFB80ENG offers complete weather protection for stadium cameras with ENG-style lenses and flat-screen monitor displays. The cover is made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera from rain and dust. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/M breathability rating), allowing heat from the camera to escape while the cover is deployed. Long sleeves and interior pockets for holding air-activated hand warmers help keep the camera operator dry and warm. Lots of zippers in all the right places make putting the Cloak on and taking it off easy to do, but still provide maximum protection. Nylon pull-ties cinch at all openings to help secure the Cloak around the camera and keep out unwanted rain, dust and other airborne particles. A clear vinyl window at the front of the Cloak allows the tally light to shine through. There is also a clear vinyl window at the rear of the Cloak that provides the camera operator with a full view of controls. Features Triple-layer, waterproof & breathable materialNew design fits flat-screen monitor displaysClear vinyl window for tally light and camera controlsRain and snow protection for stadium cameras with ENG lensesHelps keep camera operator dry and warm

Porta Brace CLK-2 The Porta Brace CLK-2 offers complete weather protection for stadium cameras with box lenses. The cover is made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera from rain and dust. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/M breathability rating), allowing heat from the camera to escape while the cover is deployed. Long sleeves help keep you dry and three (3) hand-warmer pockets in each sleeve maintain warmth to keep your arms and hands working the camera at cold, outdoor events. Lots of zippers in all the right places make putting the Cloak on and taking it off easy to do, but still provide maximum protection. Nylon pull-ties cinch at all openings to help secure the Cloak around the camera and keep out unwanted rain, dust and other airborne particles. A clear vinyl window at the front of the Cloak allows the tally light to shine through. Features 3-layer, waterproof material All closures cinch tight for extra water protection Clear vinyl window for tally light Cold and rain protection for studio cameras Keep camera operator dry and warm Equipment covered Hitachi Triax Cameras Ikegami Triax Cameras Panasonic Triax Cameras Sony Triax Cameras

camRade wetSuit EFP Handheld Grey SKU: CAM-WS-EFP-HANDHELD-GREY The camRade wetSuit EFP Handheld Grey, is a waterresistant rain cover for a wide range of ENG style Handheld cameras. Designed to withstand the elements and made of a strong light grey fabric that allows you to blend into the background. The cover is perfect for use during music or sports events as well as documentary shoots, both indoor and outdoor. The monitor and controls as well as the viewfinder are protected by the cover while still fully accessible. The one-piece camRade wetSuit EFP Handheld wetsuit closes around the lens with hook and loop fasteners for a good seal with the camera. The back of the wetsuit offers room for use of multiple or larger batteries, but can easily be shortened with a strap so you will not be bothered by loose pieces of fabric. The microphone cover has hook and loop fasteners too, so the entire cover is easy to attach. This item is supplied in a waterproof pouch with zipper, which you can use for storage and transportation of the cover when not in active use. Key features Form-fitted for a wide range of ENG-style Handheld camerasTailor-made of water-resistant fabricProtection against bad weather conditionsEasy access to the controls, ports, memory cards, display, zoom, battery compartment and Triax camera adapterStrong Easy-on-Easy-off construction with hook and loop fastenersHandmade in France, Europe5 Year warranty

camRade wetSuit EFP Large Grey SKU: CAM-WS-EFP-LARGE-GREY The camRade wetSuit EFP Large Grey, is a very strong rain cover designed for a wide range of outside broadcasting cameras using a (Sony) large lens adaptor, viewfinder and viewfinder sun hood. The discrete light grey fabric with soft lining minimalizes unwanted sound effects caused by wind and rain during operation and helps the camera not to stand out in a crowd. The cover is perfect for use during indoor and outdoor events such as music, sports, etc. The monitor and controls are protected by vinyl windows for easy view and the hand controls are fully accessible. The one-piece wetsuit closes with only hook and look fasteners which helps to get the cover over the set-up very quickly and ensures a good seal with the camera. This item is supplied in a waterproof pouch with zipper, which you can use for storage and transportation of the cover when not in active use. Features Form-fitted for a wide range of outside broadcasting cameras with (for example a Sony HDL-A1500W) large lens adaptor and hand controls Tailor-made of water-resistant near silent fabric Protection against bad weather conditions Easy access to the controls, ports, memory cards, display, zoom and battery compartment Strong Easy-on-Easy-off construction with hook and loop fasteners Handmade in France, Europe 5 Year warranty

Porta Brace CLK-STUDIOCAM The CLK-STUDIOCAM offers complete weather protection for the Blackmagic Studio Camera. The cover is made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera from rain and dust. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/M breathability rating), allowing heat from the camera to escape while the cover is deployed. Long sleeves and interior pockets for holding air-activated hand warmers help keep the camera operator dry and warm. Lots of zippers in all the right places make putting the Cloak on and taking it off easy to do, but still provide maximum protection. Nylon pull-ties cinch at all openings to help secure the Cloak around the camera and keep out unwanted rain, dust and other airborne particles. A clear vinyl window at the front of the Cloak allows the tally light to shine through. There is also a clear vinyl window at the rear of the Cloak that provides the camera operator with a full view of controls. Features Triple-layer, waterproof & breathable materialNew design fits flat-screen monitor displaysClear vinyl window for tally light and camera controlsRain and snow protection for stadium cameras with ENG lensesHelps keep camera operator dry and warm

camRade wetSuit EFP Handheld Black SKU: CAM-WS-EFP-HANDHELD-BL The camRade wetSuit EFP Handheld Black, is a waterresistant rain cover for a wide range of ENG-style Handheld cameras. Designed to withstand the elements and made of a flexible black fabric that minimizes unwanted sound effects caused by wind and rain. The cover is perfect for use during music or sports events as well as documentary shoots, both indoor and outdoor. The monitor and controls and viewfinder are protected by the cover and the controls are fully accessible. The one-piece wetsuit closes around the lens with hook and loop fasteners for a good seal with the camera. The back of the camRade wetSuit EFP Handheld wetsuit offers room for use of multiple or larger batteries, but can easily be shortened with a strap so you will not be bothered by loose pieces of fabric. The microphone cover has hook and loop fasteners too so the cover is easy to attach. This item is supplied in a waterproof pouch with zipper, which you can use for storage and transportation of the cover when not in active use. Key features Form-fitted for a wide range of ENG-style Handheld camerasTailor-made of water-resistant near silent fabricProtection against bad weather conditionsEasy access to the controls, ports, memory cards, display, zoom, battery compartment and Triax camera adapterStrong Easy-on-Easy-off construction with hook and loop fastenersHandmade in France, Europe5 Year warranty