MID49 TWIST Ball Monitor Arm 3 Inch (ARRI 1/4-20 + ARRI 3/8-16 Spuds)

MID49 TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 1/4-20 SpudsSKU: M49-TWB-ARM3-A142-A142TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 1/4-20 Spuds is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew.Included in this kit are two ARRI 1/4-20, which have removable 3mm locating pins in 10.4mm spacing from center to center. Pins can also be installed with 15mm spacing, which can be found on some random, 3rd party products.ARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to centerSecond set of holes for 3mm pins 15mm center to centerWorks with any cheese plate or accessory with ARRI standard 1/4-20 holesWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1

MID49 Universal Speedball Monitor Arm (3 Inch)SKU: M49-SPD-ARM-3 Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20.Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads.The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned.3 inch arm has pass-through holes for 1/4-20 and 3/8-16 screws.Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Product Weight: 314gProduct Dimensions (WxLxH): 63 x 25 x 273mm

MID49 Universal Speedball Monitor Arm (6 Inch)SKU: M49-SPD-ARM-6 Universal Speedball Monitor Arm (6 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 6 inch (150mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads. The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 6 inch arm has pass-through slots and holes for 1/4-20 and 3/8-16 screws. Larger holes can be utilized for nested extension packing and organization. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Product Weight: 331gProduct Dimensions (WxLxH): 63 x 25 x 349mm

MID49 Universal Speedball Monitor Arm (9 Inch)SKU: M49-SPD-ARM-9 Universal Speedball Monitor Arm (9 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 9 inch (225mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads. The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 9 inch arm has pass-through slots and holes for 1/4-20 and 3/8-16 screws. Larger holes can be utilized for nested extension packing and organization. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Product Weight: 348gProduct Dimensions (WxLxH): 63 x 25 x 425mm

MID49 TWIST Ball Monitor MountTWIST Ball Monitor Mount is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew. Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.The Speedball Clamp's "Chip Clip" design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3, 6, and 9-inch arm kits include the Speedball Extension, a second Speedball Clamp, and a hook and loop cable tie. TWIST Ball components are compatible with our Universal Speedball and any other brand of 1-inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Choose your SpudsNo SpudA 15mm friction hole with no mounting spudARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to center       Second set of holes for 3mm pins 15mm center to center       Works with any cheese plate or accessory with ARRI standard 1/4-20 holes       Works with Blackmagic Design PYXIS Monitor       Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5       Works with ARRI Camera Control Monitor CCM-1ARRI 3/8-16ARRI 3/8-16 with removable 3mm locating pins 15mm center to center        Works with any cheese plate or accessory with ARRI standard 3/8-16 holes       Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2ARRI M6 RosetteWorks with Z CAM 2.89" EVF101       Works with original PORTKEYS OEYESony / PortKeys 1/4-20   Attaches to any of the Sony cameras with Sony locating pins like Burano, FX6, and FX9       Works with Sony Burano EVF Pivot Adapter        Works with PORTKEYS LH7P (be careful, the monitor is plastic)       Works with PORTKEYS 5” BM5 IVL Bracket 1/4-20       Includes the slotted L Bracket with two 1/4-20 screws       Works with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions       Works with original RED DSMC1 EVFFemale ARRI 1/4-20        Works with any 1/4-20 product, including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center) Female ARRI 3/8-16      Works with any 3/8-16 product, including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)  1/4-20 Rosette      Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-Viewfinder       Works with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVF       This is NOT a regular ARRI rosette    Old-Style SmallHD 1/4-20       Older style SmallHD 1/4-20 with wide locating tabs       Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5        Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Indie 7, Cine 7  ARRI Viewfinder Wedge      Works with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2      Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.      Works with 3rd party products that utilize ARRI-style mounting wedges.   Blackmagic Viewfinder Wedge        Includes the NATO rail, Knuckle, and spud for Blackmagic Design dovetail wedges        Works with URSA Cine EVF - CINEURSAB/EVF       Works with URSA Cine EVF Extension - CINEURSAB/EVFEXT       Works with PYXIS Monitor Kit - CINEURSABB/AMKIT   Action Cameras (GoPro‚ DJI Osmo Action‚ Insta360)       Standard receptacle for 2-prong action camera feet       Works with GoPro, DJI Osmo Action, Insta360       Works with many other 3rd party action camera products  Sony FX6      Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained   Male Hot Shoe      Clamps to standard camera shoe mounts   Female Hot Shoe      Female shoe receptacle for standard shoe accessories    NATO Rail       Standard NATO rail with safety pins on each end       Mounting area between pins is 30mm  NATO Clamp       Standard NATO clamp with ratcheting thumbscrew       Clamping area between outside edges 21mm     Tripod Expansion Adapter        Includes a 5mm locating pin and 1/4-20 screw for attaching small cameras with a standard "tripod" mount      Remove the locating pin and screw this adapter into any two 1/4-20 threaded holes between 16.5 and 33mm center to center Threaded ARRI 1/4-20 and 3/8-16 holes also available

MID49 TWIST Ball Monitor Mount with ARRI 1/4-20 + ARRI 1/4-20 SpudsSKU: M49-TWB-ARM0-A142-A142TWIST Ball Monitor Mount with ARRI 1/4-20 + ARRI 1/4-20 Spuds is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew. Included in this kit are two ARRI 1/4-20s, which have removable 3mm locating pins in 10.4mm spacing from center to center. Pins can also be installed with 15mm spacing which can be found on some random, 3rd party products. Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews. The Speedball Clamp's "Chip Clip" design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. TWIST Ball components are compatible with our Universal Speedball and any other brand of 1-inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.ARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to centerSecond set of holes for 3mm pins 15mm center to centerWorks with any cheese plate or accessory with ARRI standard 1/4-20 holesWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1