LYNX Technik 4K UPXD converter

LYNX Technik 4K UPXD converter

12G-SDI UPXD with Frame Sync and Audio Processor

The greenMachine UPXD package is a broadcast-quality video processing unit that has a single channel up/down/cross converter with a frame synchronizer supporting a single formats up to 4K UHD (3840 x 2160) or four independent signals up to 3G-SDI.

It includes full audio processing capabilities, scalars for the spatial conversion of the video signals including versatile region of interest (ROI) selection, and high-performance deinterlacer. It also supports 4x3G (2SI Quad link) or 12G-SDI (single link) inputs and outputs for 4K UHD signals.

With 2SI quad-link <> single link conversion, signals can be interchanged in between the single link and 2SI quad links. The greenMachine UPXD package comes with a fully-featured local control interface with LCD which displays image previews and audio level meters of the processed video paths in addition to the graphical user interface called LynxCentraal. It is also supported by the Nova controller which enables the module to be remotely controlled and monitored via third party master control software.

Features

• Up/Down/Cross up to UHD 3840x2169 60Hz
• 2SI Quad-Link to/from Single-Link Conversion
• Versatile Region of Interest (ROI) scaler
• 2-Channel Deinterlacing
• 4x 3G-SDI or 12G-SDI inputs and outputs
• 1x MADI input and output
• 4x External AES/Analog inputs/outputs
• Two Dolby E decoders, Dolby E synchronization, full audio processing
• Multiple adjustable user delays for audio and video
• Multiple video processing features e.g. gain, hue etc.

Color correction

• Adjust saturation, gain, offset, lift, gamma, hue, blanking interval deletion and aperture correction
• Apply horizontal flip and YCbCr headroom clipping

Audio

• Multi-format audio embedder and de-embedder on all channels present on the video source
• Gain adjustment, 1kHz test tone, mute, inversion, mono mix-down, silence and overload monitoring
• 2x Dolby E® decoder for all 8 channels in a stream
• Dolby® metadata can be mapped to VANC acc. to SMPTE 2020-3 and SMPTE 2020-2
• Full MADI support when equipped with optional MADI fiber SFP

Funcions

4K/3G Scaler / 4x 3G Scaler

• Spatial converter with powerful region of interest (ROI) selection and scaling. The conversion modes supported are: Pillar box/Letterbox, Center cut, 14:9 conversion, Stretch to fill, and Custom ROI

Deinterlacer

• Deinterlacers on channel 1 and 2 for SD and HD

Motion adaptive filtering

• Allows deinterlacer to create a sequence of output frames at the same rate as the sequence of input fields eliminating feathering or flickering artefacts

3G-SDI level A/B

• Automatic detection of 3G level A/B
• Dual link conversion 3G level A <> 3G level B
• (3G level A acc. to SMPTE ST425-1/4:2:2, 10Bit)

Frame Synchronizer

• Dynamic synchronization of SDI sources. Embedded audio matched to the video processing delay

Metadata Management

• Manages embedded metadata: SMPTE 2020, AFD, WSS, SMPTE 2031
• Time code, Closed captions, and Teletext

Video Adjustment

• Adjust saturation, gain black and hue, blanking interval deletion and aperture correction
• Apply horizontal flip and YCrCb headroom clipping

Color correction

• Adjust gain, offset, lift, and gamma for Red, Green, and Blue (RGB)
• Adjust gain and offset adjustments for Cyan, Magenta, Yellow, and White (CMYW)

Embedder/ De-embedder

• Multi-format audio embedder and de-embedder provide access to all the channels in the input SDI and allow shuffling and embedding them to the output(s)

Audio Processing

• Gain adjustment, 1kHz test tone, mute, inversion, stereo to mono- mix on each mono audio channel silence and overload monitorin

Dolby E ® decoder

• 2x Dolby E® decoder for all 8 channels in a stream
• Dolby® metadata can be mapped to VANC acc. to SMPTE 2020-3 and SMPTE 2020-2

MADI in/out

• Full MADI support, if equipped with optional MADI SFP

Basic Audio & Video Test Generator

• Basic audio & video test signal generator with static video test patterns. Can be configured to output a test pattern on TRS errors with Frame Synchronizer

Timing

• Individual video and audio (AES and MADI) delay
• Maximum video delay per channel is 30 frames
• Maximum audio delay is 1.3 sec per AES audio channe

LynxCentraal

• New control software for automation, remote control and status monitoring

Remote Control

• Full SNMP v2 and LYNX IP remote control protocol functionality
• Enables CustomControl features