MID49 5 pin 00 to Stereo 3.5mm Male 18inSKU: M49-CBL-5PS-18 5 pin 00 to Stereo 3.5mm Male 18in (RED Komodo-X, V-Raptor, ARRI Alexa Mini, Z CAM E-2). For use with microphones or devices that have internal power (plug in power is not provided by the camera body). Good for microphones like Sennheiser MKE 400 mk2 and similar.Weight: 91gDimensions (WxLxH): 0,64 x 45,72 x 0,64 cm
MID49 Audio Breakout AB-1 SKU: M49-BOB-AB1 Audio Breakout AB-1 (RED Komodo-X, V-Raptor, ARRI Alexa Mini, Z CAM E-2) is a passive adapter that converts the camera's 5-pin 00 LEMO to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or side plates like RED Komodo Breakout Side Plate(sold separately). Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows the AB-1 to attach using a 3/8-16 screw with ARRI locating pins. Also compatible with Z CAM E2 (all models) but may conflict with CTRL 1 port or COM port due to connector angles. 20cm cable length with right angle LEMO-compatible connector. Product Weight: 42gProduktabmessungen (B x L x H): 35 x 277 x 28mm
MID49 Audio Breakout AB-10 for Canon C400 SKU: M49-BOB-AB10 Audio Breakout AB-10 for Canon C400 is a passive adapter that converts the camera's two mini XLRs to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or optional Breakout Side Plate for Canon C400 for clean cable management.Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-10 to attach using a 3/8-16 screw with ARRI locating pins.Attaches easily to rods using the Single 15mm Rod Clamp or Single 19mm Rod Clamp (sold separately). 23cm cable length with custom low profile right angle mini XLR connector.
MID49 Audio Breakout AB-2 SKU: M49-BOB-AB2 Audio Breakout AB-2 (ARRI Alexa 35, Alexa Mini LF) is a passive adapter that converts the camera's 6-pin 0B LEMO to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or side plates. Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-2 to attach using a 3/8-16 screw with ARRI locating pins. 20cm cable length with right angle LEMO-compatible connector. Product Weight: 42gProduct Dimensions (WxLxH): 35 x 277 x 28mm
MID49 Audio Breakout AB-3 SKU: M49-BOB-AB3 Audio Breakout AB-3 (RED Komodo, DSMC2, DSLR, Stereo 3.5mm TRS) is a passive adapter that converts the camera's 3.5mm plug to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or side plates. Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-3 to attach using a 3/8-16 screw with ARRI locating pins. 12 inch (30.5cm) cable length with right angle 3.5mm TRS connector. Product Weight: 42gProduct Dimensions (WxLxH): 35 x 277 x 28mm
MID49 Audio Breakout AB-4 SKU: M49-BOB-AB4 Audio Breakout AB-4 (Canon C70) is a passive adapter that converts the camera's two mini XLRs to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or side plates. Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-4 to attach using a 3/8-16 screw with ARRI locating pins. 30.5cm cable length with custom low profile right angle mini XLR connector. Product Weight: 56gProduct Dimensions (WxLxH): 35 x 362 x 28mm
MID49 Audio Breakout AB-5 SKU: M49-BOB-AB5 Audio Breakout AB-5 (Sony Venice, Venice 2, 5-pin XLR) is a passive adapter that converts the camera's single 5-pin XLR to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or 3rd party cages. Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-5 to attach using a 3/8-16 screw with ARRI locating pins. 20.3cm cable length with 5-pin male XLR connector. Product Weight: 42gProduct Dimensions (WxLxH): 35 x 277 x 28mm
MID49 Audio Breakout AB-6 SKU: M49-BOB-AB6 Audio Breakout AB-6 (Blackmagic Pocket 6K) is a passive adapter that converts the camera's two mini XLRs to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or 3rd party cages. Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-6 to attach using a 3/8-16 screw with ARRI locating pins. 30.5 cm cable length with custom low profile right angle mini XLR connector. Compatible with the Blackmagic Design Pocket Cinema Camera 6K Pro (CINECAMPOCHDEF06P) and Pocket Cinema Camera 6K G2 (CINECAMPOCHDEF6K2) Product Weight: 56gProduct Dimensions (WxLxH): 35 x 362 x 28mm
MID49 Audio Breakout AB-7 SKU: M49-BOB-AB7 Audio Breakout AB-7 (ARRI Sonosax AEM-1, Dual Mini XLR Female) is a passive adapter that converts the ARRI Alexa 35's Sonosax AEM-1 dual mini XLRs to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to ARRI's camera cage components. Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-7 to attach using a 3/8-16 screw with ARRI locating pins. 30.5cm cable length with two 3-pin female mini XLR connectors. Product Weight: 42gProduct Dimensions (WxLxH): 35 x 277 x 28mm
MID49 Audio Breakout AB-9 (Blackmagic PYXIS)SKU: M49-BOB-AB9 Audio Breakout AB-9 (Blackmagic PYXIS) is a passive adapter that converts the camera's front mini XLR and rear 3.5mm TRS plug into two standard, full-size XLRsInput 1 - balanced audio with phantom power via camera menuInput 2 - unbalanced audio, no phantom power availableAttaches by a captive 1/4-20 screw and rubber pad to the camera body or Side Plate (Blackmagic PYXIS). Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-9 to attach using a 3/8-16 screw with ARRI locating pins. Attaches easily to rods using the Single 15mm Rod Clamp or Single 19mm Rod Clamp (sold separately). 24 cm cable length with custom low profile mini XLR connector and Neutrik 3.5mm TRSWeight: 56gDimensions (WxLxH): 35 x 250 x 28mm
Direct Connect Fujifilm ETERNA 55 XLR ModuleSKU: M49-BOB-AB13Direct Connect Fujifilm ETERNA 55 XLR Module is a modified TASCAM XLR Module that interfaces directly with the ETERNA's handle connector. Both the TASCAM main module unit and the MID49 mounting bracket / cable assembly are included with this product. The modified module reduces the overall rig height and adds a robust metal mounting bracket, which can be configured behind the Rainbow Handle or any third-party handle with an ARRI 3/8-16 on the back. A miniature rosette on the mounting bracket allows the 3/8-16 screw to be positioned at various angles, including completely flat for screwing down on top of a cheese plate. When using the Direct Connect Module on the ETERNA 55, two channels of balanced audio with optional phantom power are available.
NextLevel NL-1 It is a professional device splitting audio signals, closed in a compact metal casing. This device is ideal wherever there is a need of splitting audio signal or providing galvanic separation between elements of audio track. Thanks to its small size NL-1 is perfect as "problem solver" especially in mobile installations such as: stagesfilm set(TV) StudiosDSNG vans The NL-1 is equipped with one input, True direct output and two galvanically separated outputs with independent ground fault. The splitter is built using Lundahl audio transformers ensuring highest broadcast quality and minimum distortion.The device is adapted to work in a wide range of input levels: from microphone to +16dBu. The splitter casing is made of powder-coated aluminum.The device uses the highest quality XLR connectors from Neutrik with gold-plated contacts.To ensure the best matching, the input is equipped with an input impedance switch.Made in the EU Technical data Dimensions: (LxWxH): 111mm x 82mm x 33mmDistortion: 0.1% @ + 6 dBU, 50Hz / 1% < @ + 16 dBU, 50HzFrequency response: 10 Hz - 200 kHz +/- 0.5 dBIsolation: winding-to-winding - 4kV / Winding to screen - 2kV / Screen to screen - 2kV
NextLevel NL-2 two-channel audio splitter It is a professional device splitting audio signals, closed in a compact metal casing. This device is ideal wherever there is a need to separate audio components and eliminate their mutual harmful effects such as hum influence, for example: noise. Because of its small size the NL-2 is perfect as "problem solver" especially in mobile installations such as: stagesfilm set(TV) StudiosDSNG vans The NL-2 is equipped with one input, True direct output and two galvanically separated outputs with independent ground fault. The splitter is built using Lundahl audio transformers ensuring highest broadcast quality and minimum distortion.The device is adapted to work in a wide range of input levels: from microphone to +16dBu. The splitter casing is made of powder-coated aluminum.The device uses the highest quality XLR connectors from Neutrik with gold-plated contacts.To ensure the best matching, the input is equipped with an input impedance switch.Made in the EU Technical data overview Dimensions: (LxWxH): 111mm x 82mm x 33mmDistortion: 0.1% @ + 6 dBU, 50Hz / 1% < @ + 16 dBU, 50HzFrequency response: 10 Hz - 200 kHz +/- 0.5 dBIsolation: winding-to-winding - 4kV / Winding to screen - 2kV / Screen to screen - 2kV
Next Level NL-3 antenna amplifier / splitter Next Level NL-3 is a double compact, amplifier and antenna splitter designed for wireless receivers. The device contains four functional blocks, an ultra-low noise stabilizer, a professional RF filter operating in the 470-680Mhz band, an uncompromising RF amplifier and an antenna signal splitter. All blocks together form a system with extremely high parameters. NL-3 is used wherever there is a need to provide an antenna signal from two antennas to more than one diversity receiver. This device is ideally suited to movie plans, and wherever there is a need to use multiple wireless microphones. Particularly noteworthy is the bandpass filter used in the device, whose task is to remove any interference signals from outside the receiver's operating band NL-3 consists of two identical sections. Each of them is equipped with two BNC antenna inputs and four independent SMA outputs. The device housing is made of powder-coated aluminum. Technical data Frequency response 470-680MhzGain Ok. 12dBInput impedance 50 OhmOutput impedance 50 OhmInput Port BNCOutput Port SMAPower 15V DCPower consumction ~200mADimensions 136mm x 82 x 33mm
Zacuto MicroBOOMSKU: Z-MBThe Zacuto MicroBOOM is the world's first on-camera, internally cabled, audio boom pole designed for instantaneous interviewing. It is compatible with all cameras including mobile phones, mirrorless, camcorders, ENG or Cinema Cameras.FeaturesUltra lightweight 0,17 kgQuick-releaseCamera mounted via NATO Rail or optional CUBE- NATO to coldshoe adapterAdjustable length and angleInternally cabled 1/8” to TRS FemaleTelescoping carbon fiber boom, extends 35,56-88,90 cm
Zacuto MicroBOOM XLRSKU: Z-MB-XLRThe MicroBOOM XLR is an internally cabled audio boom pole designed to attach to your camera rig. It is compatible with full size XLR connectors on cameras or microphones, or other audio devices. FeaturesAttaches a professional XLR microphone to a camera cage or camera rig InternalXLR cable with full size connectorsNATO Rail clamp for easy installationFine Pitch rosette for secure angle adjustmentTwist Lock extension tubes3/8-16 male threaded end and nut for attaching mic mountExtends from 40,64 up to 93,98 cmLightweight Carbon Fiber 10 oz