Pay with:
We ship with:
Fast shipping
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Showroom in Warsaw +48 299 06 61

PRL Complete Director’s Follow Focus Kit

PRL Complete Director’s Follow Focus Kit

The PRL follow focus is an essential but affordable piece of equipment for the professional focus puller, DoP or cinematographer. Thanks to all the included accessories you’re well prepared to get precise focus during your film shoot or video production. The PRL Follow Focus snaps onto any 15mm rod system so you don’t have to remove other rod-mounted accessories.

Thanks to the clamping knob, it allows you to fasten onto the rods without the use of any tools. It also features horizontal adjustment that allows it to work with different-diameter lenses, making this suitable for use with prime and zoom lenses.

  • Made of rugged anodized aluminium
  • Quick release clamp for 15mm rods
  • Gear can be mounted in front or rear position
  • Two adjustable & changeable A/B hard stops
  • Horizontally adjustable
  • Includes two magnetic marker rings & 4 flex gear rings
  • Lightweight 460 g
  • 1-year limited warranty on manufacturer’s defects

In the box

  • 1x Follow Focus
  • 1x Short Whip
  • 1x Speed Crank
  • 4x Hard Stop Screw (2 spare)
  • 2x Magnetic Marker Ring
  • 5x Flexible Gear Ring
Related links of the manufacturer

Ähnliche Produkte

Genus Universal Bravo Follow Focus
Genus Universal Bravo Follow Focus SKU: G-UBFFKIT Genus Universal Bravo Follow Focus features a new reversible  gear box. This allows Canon and Nikon lenses to focus in same direction when using a follow focus. The gear box is precision engineered to ensure zero backlash. The gear meshing  can be adjusted in the unlikely event that backlash develops. Smooth action of the gearbox allows the camera operator or assistant to pull accurate and repeatable focus.Genus Universal Bravo Follow Focus has quick release bracket makes it easy to attach and remove  the unit from 15mm rods. The clamping mechanisms is engineered to ensure flexibility whilst maintaining the rigidity needed in a precision follow focus. The new improved end stop mechanism makes it quick  to set and adjust follow focus marksThe smooth white 3D follow focus disc makes it easy to mark and erase follow focus points withs whiteboard marker. The beveled edge of the 3D marking disc allows the viewing of the focus points from a wide range of different angles.The Universal Focus Focus now comes as standard with 3 different size pitches gears 0.5 pitch gear 0.6 pitch gear 0.8 pitch gear and a flexible lens gear as standard. The Genus Lens Flexi gear is 0.8  ring which easily attaches to stills photographic  lenses to allow for use with follow focus units.

PLN 2,599.91*
net: PLN 2,113.75
Free shipping
Wooden Camera Zip Focus (15mm LW Follow Focus)
Wooden Camera Zip Focus (15mm LW Follow Focus) SKU: 255600 Wooden Camera Zip Focus is built to attach directly to a 15mm lightweight rod and has a gear ratio of 1:1. The Zip Focus pivots and adjusts to fit any lens, and utilizes a minimal amount of space. The included .8 mod cine lens gear and friction gear can be flipped to the front or back position which is helpful for compact lens configurations. The hard stop disc can be used with DSLR lenses with infinite focus rotation and two standard marking discs are included for cine lenses. Please note that the Zip Focus is geared for standard rotation and is not reversible, as some might prefer for Nikon Primes, etc. Included Items 1 x Hard Stop Disk 2 x Marking Disks 1 x Friction Gear 1 x .8 Mod 35 Tooth SPECIFICATIONS Weight: 352 gDimensions: 101.6 mm x 88.9 mm x 127 mm

PLN 2,572.55*
net: PLN 2,091.50
Free shipping
SHAPE single rod follow focus
SHAPE single rod follow focus SKU: FA123 Use the compact SHAPE Follow Focus Kit with Single 15 mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens.  At the core of the kit is a rubber, anti-slip follow focus wheels attached to a single aluminum 15 mm rod clamp. The clamp rotates to adjust to most lens sizes, and it’s tightened by a locking lever. The clamp’s rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49 mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11″ whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel. At the center of the knob, an ARRI-standard accessory port for attaching separately available accessories such as a whip or a speed crank;All gears can be flipped to the front or back position which is helpful for compact lens configurations;Two rotation points (one on the rod and one on the body) allowing you to get the follow focus perfectly aligned vertically on the side of the camera body;Swing Arm Design allows you to simply pull the follow focus away from the lens for a quick lens change then you can push it back into place when you’re ready;A compact design takes little space, so you can still attach a matte box to the front;Use the swing arm to properly align the follow focus and then you can tighten the thumbscrew on the bottom to keep it in place. In the box 1 x FOLLOW FOCUS5 x GEAR WHEEL (M 0.5/78T ; M 0.6/64T; M 0.8/38T; M 0.8/43T; M 0.8/78T)1 x SPEED CRANK1 x 11’’ WHIP4 x MARKING DISK WITH MAGNET1 x FRICTION RUBBER WHEEL 49MM

PLN 2,271.50*
net: PLN 1,846.75
Free shipping
Vocas MFC-3F follow focus with adjustable friction
Vocas MFC-3F follow focus with adjustable friction SKU: 0500-0035 Cameras have become smaller, lighter and less expensive. The added gear has to be priced in relation, but we also have to keep the high quality that Vocas is known for. For this reason Vocas has developed a very unique follow focus that is totally different from all other follow focus systems currently in the market! Can you imagine a follow focus system that is 100% playless? The Vocas MFC-3F has no transmission between the focus knob and the drive gear, so we can guarantee a 100% playless follow focus! Read on to learn more about our newest innovation. 100% Playless The unique feature of the new follow focus system MFC-3 is that the focus knob and drive gear consist of only one part, there is no transmission in the new MFC-3. This is a direct drive, and because of the elimination of internal gears, there can never be any difference in the motion going in and going out, making it 100% playless, Vocas can guarantee you that! This design also results in the MFC-3 having a 1:1 'transmission' ratio making it ideal for lenses with a small focus throw such as DSLR lenses and smaller cameras with integrated lenses. Additionally, because of the elimination of internal gears the lifespan of the product is increased dramatically. The unique shape of the drive gear teeth is what makes this all possible. These specially shaped teeth can push the gear ring of the lens up or down when rotating the focus knob the same way a camera operator is used to Two versions There are 2 versions of the MFC-3, the standard version and the F version. The MFC-3F has one additional feature over the standard version, namely it has an adjustable friction build in. Rotating the red dial on the focus knob allows you to fine tune the internal friction of the MFC-3F to your own preference. Ergonomics This follow focus is angled slightly downwards for more comfort and can be rotated horizontally to a certain extent to make operating it even more ergonomic Reversible rotation direction The rotation direction can also be reversed. This is easily done by moving the follow focus forward and backwards to let the gear grip the lens on the left or right side of the drive gear. Palm support As with the highly successful Vocas MFC-2, a palm support accessory is available for the MFC-3. This palm support makes it possible to focus the lens and support the camera at the same time! You no longer have to worry about your camera shaking when you switch from supporting your camera to operating the follow focus. Right handgrip Want to support the camera on both sides without purchasing another bracket for it? We have a rosette accessory for the right side of the MFC-3 15 mm bracket, which allows you to mount a handgrip on the same bracket.

PLN 2,572.55*
net: PLN 2,091.50
Pay with:
We ship with: