Products from Zacuto

Close filters
from to
1 From 4
No results were found for the filter!
zacuto Z-4PVC Zacuto 4 Pin Lemo Power & Video Cable with...
SKU: Z-4PVC / This handy cable allows you to power the Kameleon and send the SDI signal from your camera with the BNC connector. A molded sheathing keeps cables neat, while the ends are free to be configured for your setup
€183.26 *
Net Price €154.00
Zacuto 2 Pin Lemo Power Video Cable Zacuto 2 Pin Lemo Power & Video Cable with...
SKU: Z-EPVC-PS / The cable allows you to power the Gratical Eye and send the SDI signal from your camera with the BNC connector using one single cable
€183.26 *
Net Price €154.00
Zacuto Kameleon Micro-OLED EVF Zacuto Kameleon Micro-OLED EVF
SKU: Z-KEVF / Zacuto Kameleon EVF is a powerful, 1080p Micro-OLED EVF for All Your SDI and HDMI Cameras. The Kameleon EVF offers unique features like 4K HDMI input downscaled to 1080P, 3D LUTS.
€2,284.80 *
Net Price €1,920.00
Right Angle Extension cable for Canon 18-80 Zacuto Right Angle Extension cable for Canon 18-80
Z-C18RC / Zacuto Right Angle Extension cable for Canon 18-80 allows you to extend the relocator cable of the Canon 18-80 lens grip an additional 6” from the lens.
€410.00 *
Net Price €344.54
Zacuto GH5 Cage (Z-G5C) Zacuto GH5 Cage (Z-G5C)
Zacuto GH5 Cage is lightweight and compact, it packs in a ton of features! The GH5 Cage screws into the bottom of the camera with a provided ¼ 20 screw. It also attaches to the sides of the Panasonic GH5 camera, using the Panasonic...
€550.00 *
Net Price €462.18
Zacuto Canon Y Cable Zacuto Canon Y Cable (Zoom and Focus Control)...
The Zacuto Canon Y Cable for the Canon 18-80 lens splits to provide both zoom and focus control from Canon’s hand controllers. It also gives you an additional 9 inches of cable going toward the back of the camera for studio tripod use...
€880.00 *
Net Price €739.50
Zacuto Scissor Lens Support Zacuto Scissor Lens Support
SKU: Z-SLS / The Zacuto Scissor Lens Support is compatible with Fujinon MK lenses. The Scissor Lens Support attaches to the base of your lens with included M3.5 screws. It opens with a scissor motion to securely clip onto lightweight,...
€220.00 *
Net Price €184.87
Zacuto Tornado Z-TRN Zacuto Tornado (Z-TRN)
SKU: Z-TRN / The Zacuto Tornado grip connects to the Zacuto Z-Drive (not included) follow focus via a standard whip port. Slide the Tornado grip into the Z-Drive whip port by pushing down on the round plunger and pushing the Tornado into...
€300.00 *
Net Price €252.10
Zacuto Z-Drive Follow Focus Zacuto Z-Drive Follow Focus (Z-DRV)
SKU: Z-DRV / The Zacuto Z-Drive is a unique, universal direct drive follow focus, designed with single operator shoulder mounted rigs in mind. Because it has a universal joint and no internal gears it can’t develop play. It attaches to a...
€600.00 *
Net Price €504.20
Zacuto VCT Pro Baseplate Zacuto VCT Pro Baseplate
SKU: Z-VCT-P / The VCT Pro baseplate is compatible with all cameras including Canon EOS C-series, Sony FS5 and FS7, AJA CION, BlackMagic, RED cameras, Arri Alexa and Amira, DSLRs, Mirrorless and more
€744.94 *
Net Price €626.00
Zacuto Rosette Minimount Zacuto Rosette Minimount
SKU: Z-RMM / The Rosette Minimount slides onto a set of 15mm lightweight spaced rods to give you an Arri M6 rosette on either side of the rods. You can use these rosettes to mount a number of accessories, including the handgrip for the...
€245.00 *
Net Price €205.88
Zacuto +4 Diopter Zacuto +4 Diopter
SKU: Z-D4 / +4 diopter is coated with our newly improved anti-fog formula. You can take our patent pending fog protection formula from an air conditioned interior to the most humid exterior and it’s guaranteed not to fog.
€15.00 *
Net Price €12.61
1 From 4