Produkte von Zacuto

SKU: Z-EPVC-PS / The cable allows you to power the Gratical Eye and send the SDI signal from your camera with the BNC connector using one single cable

SKU: Z-KEVF / Zacuto Kameleon EVF is a powerful, 1080p Micro-OLED EVF for All Your SDI and HDMI Cameras. The Kameleon EVF offers unique features like 4K HDMI input downscaled to 1080P, 3D LUTS.

Z-C18RC / Zacuto Right Angle Extension cable for Canon 18-80 allows you to extend the relocator cable of the Canon 18-80 lens grip an additional 6” from the lens.

Zacuto GH5 Cage is lightweight and compact, it packs in a ton of features! The GH5 Cage screws into the bottom of the camera with a provided ¼ 20 screw. It also attaches to the sides of the Panasonic GH5 camera, using the Panasonic...

The Zacuto Canon Y Cable for the Canon 18-80 lens splits to provide both zoom and focus control from Canon’s hand controllers. It also gives you an additional 9 inches of cable going toward the back of the camera for studio tripod use...

SKU: Z-SLS / The Zacuto Scissor Lens Support is compatible with Fujinon MK lenses. The Scissor Lens Support attaches to the base of your lens with included M3.5 screws. It opens with a scissor motion to securely clip onto lightweight,...

SKU: Z-DRV / The Zacuto Z-Drive is a unique, universal direct drive follow focus, designed with single operator shoulder mounted rigs in mind. Because it has a universal joint and no internal gears it can’t develop play. It attaches to a...

SKU: Z-TRN / The Zacuto Tornado grip connects to the Zacuto Z-Drive (not included) follow focus via a standard whip port. Slide the Tornado grip into the Z-Drive whip port by pushing down on the round plunger and pushing the Tornado into...

SKU: Z-TRN / The Zacuto Tornado grip connects to the Zacuto Z-Drive (not included) follow focus via a standard whip port. Slide the Tornado grip into the Z-Drive whip port by pushing down on the round plunger and pushing the Tornado into...

SKU: Z-DRV / The Zacuto Z-Drive is a unique, universal direct drive follow focus, designed with single operator shoulder mounted rigs in mind. Because it has a universal joint and no internal gears it can’t develop play. It attaches to a...

SKU: Z-VCT-P / The VCT Pro baseplate is compatible with all cameras including Canon EOS C-series, Sony FS5 and FS7, AJA CION, BlackMagic, RED cameras, Arri Alexa and Amira, DSLRs, Mirrorless and more

SKU: Z-RMM / The Rosette Minimount slides onto a set of 15mm lightweight spaced rods to give you an Arri M6 rosette on either side of the rods. You can use these rosettes to mount a number of accessories, including the handgrip for the...