339,00 € ohne MwSt.
Sofort versandfertig, Lieferzeit ca. 1-3 Werktage
- Artikel-Nr.: SW11361
Zacuto Z-Finder Pro 3x
The Z-Finder Pro 3x is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the LCD screen by 3x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against our comfy, large eyecup. The Z-finder Pro 3x comes with a 40 mm diameter Zacuto optical designed lens, anti-fog coated protective covers, and a mounting system designed for 3” LCD screens. (A 3.2” version is available.) The diopter allows you to dial in the focus to match your eye. If you need extra focal points you can use the included Z-Finder Extender Frames. These are semi-permanent stackable frames that attach to the body of the Z-Finder Pro and extend the Z-Finder glass further away from the LCD screen for people who are farsighted.
The 3x magnification is recommended in particular for users who are farsighted and may have problems seeing up close. If you wear strong reading glasses this is the model for you. The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). Users with 20/20 vision can use either magnification. It is a personal preference. Your camera model is irrelevant when choosing between the 2.5x and 3x magnifications. If you are particularly nearsighted and have problems seeing distances or are just looking for a smaller magnification we recommend the Z-Finder Pro 2.5x. Farsighted users can still use the 2.5x model with the addition of the included Extender Frames.
The Z-Finder Pro attaches to your camera with the included Gorilla Baseplate and Z-Finder 3" Mounting Frame for Small DSLR Bodies. (The Z-Finder Mounting Frame can also be attached to our DSLR Baseplate). The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20” screw and has ¼ 20” screw holes underneath to attach a tripod plate. The metal Z-Finder Mounting Frame attaches to the Gorilla Baseplate using the provided red thumb screws. The Z-finder itself pops on and off the Z-finder Mounting frame. No magnets or glue are used. The metal Z-Finder Mounting Frame is backed with rubber to prevent scratching or slippage. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release.
The Zacuto Z-Finder Pro 3x includes
- Z-Finder Pro loupe with 3x magnification and diopter
- Three (3) Extender Frames
- Gorilla Baseplate and 3” Mounting Frame for Small DSLR Bodies (Canon 5D M2/7D/60D-Nikon D300/D90/D7000 type cameras)
- Lanyard and Lanyard Hook
- Lens Cap, Sun Mask, and protective boot
- Z-Finder Dust Cover