Zacuto Z-Finder Pro 2.5x für 3.2" Screens Z-FIND-PRO232

403,41 € * mit MwSt.
339,00 € ohne MwSt.

zzgl. Versandkosten

Versandkostenfreie Lieferung!

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

  • SW11320
Zacuto Z-Finder Pro 2.5x for 3.2" Screens Z-FIND-PRO232 The Z-Finder Pro 2.5x for 3.2”... mehr
Produktinformationen "Zacuto Z-Finder Pro 2.5x für 3.2" Screens Z-FIND-PRO232"

Zacuto Z-Finder Pro 2.5x for 3.2" Screens

Z-FIND-PRO232

The Z-Finder Pro 2.5x for 3.2” screens is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the LCD screen by 2.5x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against our comfy, large eyecup. The Z-finder Pro 2.5x for 3.2” screens comes with a 40 mm diameter Zacuto optical designed lens, anti-fog coated protective covers, and a mounting system designed for 3.2” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal points you can use the included Z-Finder Extender Frames. These are semi-permanent stackable frames that attach to the body of the Z-Finder Pro and extend the Z-Finder glass further away from the LCD screen for people who are farsighted.

The Z-Finder Pro attaches to your camera with the included Gorilla Baseplate and Z-Finder 3.2" Mounting Frame for Small DSLR Bodies. (The Z-Finder Mounting Frame can also be attached to our DSLR Baseplate. ) The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20” screw and has ¼ 20” screw holes underneath to attach a tripod plate. The metal Z-Finder Mounting Frame attaches to the Gorilla Baseplate using the provided red thumb screws. The Z-finder itself pops on and off the Z-finder Mounting frame. No magnets or glue are used. The metal Z-Finder Mounting Frame is backed with rubber to prevent scratching or slippage. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release.

The Zacuto Z-Finder Pro 2.5x for 3.2” Screens includes

  • Z-Finder Pro loupe with 2.5x magnification and diopter
  • Three Extender Frames
  • Gorilla Baseplate and 3.2” Mounting Frame for Small DSLR Bodies (Canon 5D M3 Nikon D800/600 type cameras)
  • Lanyard and Lanyard Hook 
  • Lens Cap, Sun Mask, and protective boot
  • Z-Finder Dust Cover
Weiterführende Links zu "Zacuto Z-Finder Pro 2.5x für 3.2" Screens Z-FIND-PRO232"
zacuto gh3 gh4 z-finder pro Zacuto GH3/GH4 Z-Finder Pro Z-FIND-GH3
391,51 € * mit MwSt.
329,00 € ohne MwSt.