Wooden Camera Blackmagic EVF Modification Kit

Wooden Camera Blackmagic EVF Modification Kit

SKU: 217300

Blackmagic EVF Modification Kit allows you to disassemble the EVF originally intended for the Blackmagic URSA and URSA Mini cameras and use it on many other camera systems. The L bracket design can attach natively to Wooden Camera UVF Mount V2 and has 1/4-20 and 3/8-16 holes on the bottom as well as a 1/4-20 on the side. Included in the kit is a D-Tap to 4pin mini XLR cable measuring 24 inches long (61 cm). The Modification Kit's 4pin mini XLR power input accepts 12-24V.

Some tools needed to perform the modification are included in the kit and a detailed modification instructional video is provided below. Modification should be done with extreme care. Wooden Camera will not be held responsible for any damage during or after modification. Please note that some cameras and devices may not work with the HD-SDI input due to signal format variations. Confirmed working cameras include

• Phantom FLEX 4K
• ARRI Alexa / Alexa Mini
• RED Epic / Scarlet
• Blackmagic URSA / URSA Mini / Cinema Camera / Studio Camera / Micro Studio Camera

Included

• 1 x Snap Ring Pliers
• 1 x Rubber Tipped Tweezers
• 3 x M3x12mm Socket Cap Screws
• 1 x 2.5mm Allen Wrench
• 1 x 2mm Allen Wrench
• 1 x 1.5mm Allen Wrench
• 1 x T10 Torx Wrench
• 2 x #6-32x1/2" Phillips Flat Head Screws (for attaching to UVF Mount V2 - sold separately)