2.609,00 € ohne MwSt.
Lieferzeit ca. 3-5 Tage
- Artikel-Nr.: SW13902
Switronix REC5-MA Recon X5
HD-SDI Modular Wireless TX/RX System Gold Mount
The Recon X5 HD-SDI Modular Wireless TX/RX System with 3-Stud Mount is a transmitter and receiver set that wirelessly sends SD/HD-SDI video, along with embedded audio, over 500 feet from a camera to a monitor. The signal is transferred uncompressed and with a latency of less than one video frame at 60fps, allowing for real-time monitoring. Transmitted data is encrypted for security.
A graphical interface on the receiver lets you switch from auto frequency selection or manually select a 5.1 to 5.9GHz channel. You can also name transmitters and receivers, select latency, and adjust settings. The ability to name transmitter and receivers is particular useful on multi-camera shoots. You can even use the receiver as a camera feed switch and choose between feeds from multiple transmitters on set.
The receiver is powered by a 3-Stud Anton Bauer battery using the attached battery plate, or from other external sources via a 6-pin 2B LEMO connection. The transmitter features 2-pin Amphenol connector for direct wiring to the back of a JetPack X or ENG camera. Additionally, you can mount an optional Switronix V-Mount or 3-Stud battery plate to the back of the transmitter.
- 500 ft real-time transmission from camera to monitor
- SD/HD-SDI input and loop through output on transmitter
- Two SD/HD-SDI outputs on receiver
- Sends uncompressed HD video with embedded audio
- Latency is less than one video frame at 60fps
- Receiver powered by 3-Stud Anton Bauer battery
- Transmitter with 2-pin Amphenol connector for direct wiring to the back of a JetPack X or ENG camera
- Three 1/4"-20 threads on bottom of transmitter and receiver; one centered and two 18mm apart for adding rod mounts
- 15.49 cm x 9.91 cm x 3.30 cm (TX)
- 18.29 cm x 9.91 cm x 3.18 cm (RX)
- Housing Aluminum
- MountingThree ¼-20 thread mounts on bottom
- 0.64 kg (TX)
- 0.64 kg (RX)
- Power Intput
- 11-17vdc via battery plate (TX)
- 11-17vdc via battery plate and 6-pin 2B Lemo(RX)
- Transmission Distance 500 ft+ (152.4 m)
- Transmitter HD/SDI Input, HD/SDI Loop through output
- Receiver 2HD/SDI output
- Supported Format
- 1080p: 23.98psf, 24p, 25p, 25psf, 29.97p
- 1080I: 50I, 60I
- 720p: 24p, 25p, 50p, 60p
- SD: 480I, 576I