495,00 € ohne MwSt.
Sofort versandfertig, Lieferzeit ca. 1-3 Werktage
- Artikel-Nr.: SW15159
SmartSystem SmartSLIDER Reflex S 800
Service brake + Patent pending fluid drag system
SmartSLIDER Reflex S 800 with its 800 mm of stroke is the longest one. It's very portable also because it weights only 2.2 kg, but it needs two fixing supports to work at best.
The only slider with fluid drag
Imagine the feeling that you have using a fluid head... Now you can experience the same feeling using a slider. SmartSLIDER Reflex S is the only camera slider in the world with a patent pending embedded flud friction. The most of the sliders drags work pushing on the sliding bar making a certain friction and they are prone to all the irregularities of the rail's surface. For this reason our brand new patented fluid friction system act directly on the ball bearings granting uniformity and linearity along all the slider's stroke. Adjusting the drag to the payload applied on the slider it's possible to make regular and smooth starts and stops that will not be affected from any vibration depending on trajectory corrections.
SmartSLIDER Reflex S is the best slider for the professional videomakers that need lite equipment without give up on quality.
The perfect choice for every lite camera
The sloped aluminum bars grant strenght and lightenss.
It can be extended with a full set of add-ons
Motion kit available: DigiMOTOR Reflex
SmartSLIDER Reflex S is the best slider to make video with lite cameras or DSLR.
The areonautical aluminum structure has been especially designed to reduce the slider's weight, that's less than 2.2 kg and maximize the resistance to bendings and twistings.
The sliding bars are fixed in sloped position to unload the weight on the flat surfaces of the bar itself.Moreover the structure of the rails that forms a triangle grants a maximum payload of 14 kg.
The sliding surface that is inside the two sliding bars is always protected from every unintentional shock.
Make smooth tracking shots will be a piece of cake thanks to the ultra-smoothness of every SmartSLIDER Reflex. “No sliding friction”: that's the feeling that you'll have when you'll use the SmartSLIDER Reflex. Special high-speed ball bearings fixed on wheels turned from a special high resistance plastic material and rolling on anodized and rectified aluminum bars offers an unprecedented sliding smoothness. Tha lack of plays is granted from the careful calibration to which every slider is exposed
Changing position with all the equipment fixed on the SmartSLIDER Reflex carriage is not a problem because SmartSLIDER Reflex is provided with a useful service brake that can be actevated along all the slider length. It'll be enough to rotate the brake ring nut to lock the carriage and move without troubles.
In the box
1 x SmartSLIDER Reflex S
2 x Locking knobs
1 x 3mm Hex Key
1 x User Manual
Stroke 800 mm
Height 65 mm
Width 139 mm
Length 1008 mm
Weight 2.3 kg
Maximum guaranteed load capacity 14 kg
Tested with 14 kg
Ultra low friction bearings ok
Anodized aluminium rails ok
High resistance plastic wheels ok
3/8'' stainless fixing ok
Standard tripod fixing ok
Double tripod fixing ok
Tripod and monopod fixing ok
Double stand fixing (5/8'' holes) ok
Service brake ok
Upside-Down application on double stand ok