Core SWX Hypercine Base V-mount Quad charger / discharger

2.378,81 € * mit MwSt.
1.999,00 € ohne MwSt.

zzgl. Versandkosten

Lieferzeit ca. 3-5 Tage

  • SW16975
Switronix Hypercine Base Switronix has transformed it’s award winning Hypercore series of... mehr
Produktinformationen "Core SWX Hypercine Base V-mount Quad charger / discharger"

Switronix Hypercine Base

Switronix has transformed it’s award winning Hypercore series of battery packs into a “block” battery form factor with the new Hypercine unit. The Hypercine supports the film and digital cinema markets by offering both 14.4v and 28v power outputs.

The Hypercine was developed based on requests for an air travel friendly, Li-Ion, block battery solution. Leveraging the high-draw Hypercore battery technology, Switronix was able to provide a device which allows the user to place four brick battery packs within the device housing, transforming it into one single unit, while also offering simultaneous, built-in charging.

With four Hypercore 98 batteries installed, the unit provides 392wh. Keeping travel guidelines in mind, you may also use Hypercore Prime battery packs, increasing the maximum capacity to 760wh. Each battery pack is placed within a hopper style system, with locking panels, allowing you to transport the unit just as you would a block battery. With the battery packs installed, you can choose to use the dual 14.4v 4-pin XLR outputs, or simultaneously use the 14.4v outputs with the 28v 3-pin XLR output. When you’re done using the battery pack, supply the Hypercine with 100-240VAC via it’s AC in, and charge up the unit in as little as 3 hours. A large, multifunction backlit LCD is present on the front of the unit to provide cumulative data when in discharge modes, and isolated battery pack information when in charge mode.

A built-in 28v regulator insures that the proper power is provided, while incorporated low-voltage circuitry insures the battery packs within are well protected.

The Core SWX Hypercine is a travel friendly, light weight, modular system, powerful enough to provide extended runtime to cameras including ARRI, Sony F65, RED, Panavision, etc. The 28v output can also be used to power HMI, and heavy draw LED lights.

Hypercine will ONLY work with SMART battery packs and the four packs must be of equal capacity. Switronix reccomends using Hypercore

Hypercine Base technical data

Capacity 392wh-760wh

36.51 cm x 28.26 cm x 18.73 cm (without handle)
36.51 cm x 33.02 cm x 18.73 cm (with handle)

11.43 kg (98wh battery packs installed)
12.29 kg (150wh battery packs installed)

Normal Runtime (100W): approx. 4-8Hrs


Weiterführende Links zu "Core SWX Hypercine Base V-mount Quad charger / discharger"
Core SWX Cube 200 Core SWX Cube 200 200W Industrial AC Power...
355,81 € * mit MwSt.
299,00 € ohne MwSt.