* Preise inkl. MwSt. ohne Versandkosten
Sofort versandfertig, Lieferzeit ca. 1-3 Werktage
- Artikel-Nr.: SW20327
CamDo outdoor enclosure is fitted with a sturdy aluminum mounting bracket that contains multiple ¼"-20 threaded holes on the top, back, and bottom for use with standard tripod screws. It also has 2 slots at the back for using straps to attach the enclosure to a pole. The CamDo solar panel is removable and attached to the top of the enclosure using a dual ball socket arm so it can be positioned for optimum sun exposure. The solar panel charges the included Lithium Polymer battery which outputs 5 volts to power the camera or other accessories in a weatherproof enclosure.
The enclosures are designed to be crushproof and dust tight. Inside the weather resistant enclosure contains an aluminum bracket designed to hold the GoPro Hero5 / Hero4 / Hero 3 camera, and CamDo Blink Time Lapse Controller. It is possible to access the SD card, or USB connector without removing the camera. If the camera needs to be replaced, the fit is extraordinarily tight, guaranteeing that the camera will be in the exact same position as before so there is no disruption to your time lapse footage positioning. The interior has space for extra batteries or other accessories such as our Motion Detector. The enclosure is fitted with a standard 67mm filter adapter and a neutral density UV optical glass “digital filter” is included. You can replace the filter with your filter of choice.
Solar Panel Specifications
Dimensions: 220 x 255 x 5mm (8.7 x 10.1 x 0.2in)
Weight: 360g (12.75oz)
Peak Current: 1500mA
Peak Power: 9.0W
Cell Type: Monocrystalline
Open Circuit Voltage: 7.0V
Peak Voltage: 6.0V
Cell Efficiency: 19%
Capacity: 12,000 mAH, 44 Wh
Output: 5V 2A and 5 V, 1A (two outputs)
Input: 5-6 V, 2000 mA
Maximum Output Power: 15 Watts (total)
Weight: 11 oz (312 g)
Dimensions: 4" x 4.25" x 0.75" (104 x 107 x 19 mm)
Always On Mode: does not automatically shutdown when inactive.
Protection: Overcharge, Over discharge, Over Current, Short Circuit
LED indicators: light sequentially when charging to indicate the current capacity
Material: NK-7 Polypropylene Resin
Exterior Dimensions: 9.1" x 6.8" x 3.8" (231 x 173 x 97 mm)
Interior Dimensions: 7.4" x 4.9" x 3.1" (188 x 124 x 79 mm)
Padlock holes: 2 at top to secure the contents.
Mounts: Aluminum bracket with tripod holes (¼"-20) on the top, back, and bottom, as well as two 1.1" slots at back for strapping to a post.