289,00 € ohne MwSt.
Sofort versandfertig, Lieferzeit ca. 1-3 Werktage
- Artikel-Nr.: SW15867
BeachTek DXA-SLR ULTRA
New, powerful preamplifiers give you exceptionally clean audio with plenty of punch. Your audio will always be recorded in sync with the video. Direct audio recording eliminates the need to have a separate audio recording device and syncing the audio in post.
The DXA-SLR ULTRA is very easy to set up and use. The Neutrik brand combo XLR / ¼” inputs makes it easy to attach a variety of audio gear including wireless systems, mixers, sound boards and professional condenser microphones that require phantom power to operate.
The inputs are transformer balanced for isolation and enhanced circuit protection. Built-in VU meters makes it easy to verify the proper input levels at a glance, while the level controls allow you to adjust the output signal for optimum recording. Built-in fast acting limiters prevent distortion from overly hot inputs for worry free operation. The phone jack lets you monitor the audio from the adapter during recording, or camera during playback.
A unique feature of the DXA-SLR ULTRA is the sleek detachable rod support system to easily attach a matte box, follow focus and other gear for incredible versatility. Includes two 3″ rods that are threaded on both ends. Extra rods can be simply threaded on to extend to any length needed.
The adapter mounts neatly to the bottom of the camera and can also be mounted to any standard tripod.
What is included
ROD SUPPORT WITH 3" RODS
SC35 OUTPUT CABLE
AV ADAPTER CABLE
DXA-SLR ULTRA Technical data
Output Level -26dBu at 0dB on the VU meter
Frequency Response 20Hz to 20kHz (+/- 0.5dB)
THDLess than 0.01% @ 1kHz, -30dBu input
S/N Ratio85dB @ 1Khz, -30dBu input
Phantom Power Dual regulated 12 or 48 volt power supplies Current to 14mA (direct short)VU meter-18 to +3dB in 3dB increments
Battery Type One 9 volt alkaline or lithium battery
Dimensions 152 mm x 95 mm x 44 mm
3 hours typical with alkaline battery (no phantom)
8 hours typical with lithium battery (no phantom)
Adapter 18 oz (0.51 kg)
Rod Mount 8 oz (0.23 kg)
Maximum Input Levels
MIC level (LO gain) +10dBu
MIC level (HI gain) -20dBu
LINE level: +14dBu